Nikodemus' item evaluations

[Nikodemus_Blackwood 1]

This is the thread I will be posting the items I craft daily for evaluation by GM's before offering them to players.

Edited April 7, 2016 by Nikodemus_Blackwood

[Nikodemus_Blackwood 1]

-1 mat +1 weapon

Name: Steel Longsword

Profession: Blacksmith

Rank: 1

ID# 53981 results:

CD: 8

Quality: Good

Tier: 1

Item Type: One Handed Straight Sword

Enhancements: None

Description: A basic steel longsword. It's shape is similar to standard European longswords with simple cross guard and hilt designs. The 3.5 foot blade is drawn to a double edged shape and has a contoured fuller running from the bottom of the blade to a few centimeters below the tip. A basic leather wrapped handle sits between the crossguard and the simple rounded pommel.

 

 

Craft 2. Fail. CD 3 -1 mat

Edited March 29, 2016 by Nikodemus_Blackwood

[Jomei 0]

3 hours ago, Nikodemus_Blackwood said:

-1 mat +1 weapon

Name: Steel Longsword

Profession: Blacksmith

Rank: 1

ID# 53981 results:

CD: 8

Quality: Good

Tier: 1

Item Type: One Handed Straight Sword

Enhancements: None

Description: A basic steel longsword. It's shape is similar to standard European longswords with simple cross guard and hilt designs. The 3.5 foot blade is drawn to a double edged shape and has a contoured fuller running from the bottom of the blade to a few centimeters below the tip. A basic leather wrapped handle sits between the crossguard and the simple rounded pommel.

 

 

Craft 2. Fail. CD 3 -1 mat

((You do not need to submit good items for approval. Only rare-Perfect))
Approved

[Nikodemus_Blackwood 1]

-1 mat, +1 weapon.

Name: Iron rapier

Profession: Blacksmith

Rank: 1

ID# 54281

CD: 6

Quality: bad

Tier: 1

Item Type: rapier

Enhancements: None

Description: a basic rapier with a simple basket hilt. Due to the low carbon amount in the iron, the blade can be difficult to maintain without proper training. A basic rapier as this would be suitable for someone just starting, but not worth much to higher level players.

 

Craft attempt 2 failed. -1 Material.

ID# 54283

Craft: 1

[Nikodemus_Blackwood 1]

Name: Cairnwraith's Razor

Profession: Blacksmith

Rank: 1

ID# 54547

CD: 12 (11 + 1)

Quality: Perfect

Tier: 1

Item Type: One Handed Straight Sword

Enhancements: (3/3 slots used)  Bleed (1 Slot):  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 damage for 2 turns to enemy/mob. This only applies to natural rolls (unmodified); DMG +1 (1 slot), Accuracy: +1 BD (1 Slot)

Description: A one handed longsword made of exquisite blackened steel. The blade is sharpened to such a fine degree, it passes through anything so finely and deeply that the target feels no real pain and most die from blood loss without realizing they were touched by this blades gentle kiss. The cross guard is ornately carved like like twin skeletal hands reaching out with clawed fingers, while the handle itself is shaped like to resemble a Talwar hilt. It is named for a spectral entity found in ancient desert cairns in Arabia whose claws are sharp and thin. they swarm their victims and cut them multiple times over the body, bleeding them dry and sucking the life essence from their blood.

-1 mat, +1 weapon

 

 

Name: Gorgon's Gaze

Profession: Blacksmith

Rank: 1

ID# 54549

CD: 13 (12 + 1)

Quality: Perfect

Tier: 1

Item Type: One Handed War Hammer

Enhancements: (3/3 slots used)  Paralyze (1 Slot): Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralyzed; Accuracy: +2 BD (2 Slots)

Description: A large one handed Warhammer made of steel. The head of the hammer is shaped in the visage of a a Gorgon, the face of the hammer has a carved ornate eye in the center with a rune of paralysis etched into it's pupil. The end of the hammer is made into the shape of 8 snake heads with their mouths open. The handle is carved in a swirling scaled pattern to replicate the snake-like body of the Gorgon. At the end of the handle, another snake head is ornately carved with small emeralds in it's eyes.

 

-1 mat, +1 weapon

Edited April 1, 2016 by Nikodemus_Blackwood

[Mack 0]

4 hours ago, Nikodemus_Blackwood said:

Name: Cairnwraith's Razor

Profession: Blacksmith

Rank: 1

ID# 54547

CD: 12 (11 + 1)

Quality: Perfect

Tier: 1

Item Type: One Handed Straight Sword

Enhancements: (3/3 slots used)  Bleed (1 Slot):  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 damage for 2 turns to enemy/mob. This only applies to natural rolls (unmodified); DMG +1 (1 slot), Accuracy: +1 BD (1 Slot)

Description: A one handed longsword made of exquisite blackened steel. The blade is sharpened to such a fine degree, it passes through anything so finely and deeply that the target feels no real pain and most die from blood loss without realizing they were touched by this blades gentle kiss. The cross guard is ornately carved like like twin skeletal hands reaching out with clawed fingers, while the handle itself is shaped like to resemble a Talwar hilt. It is named for a spectral entity found in ancient desert cairns in Arabia whose claws are sharp and thin. they swarm their victims and cut them multiple times over the body, bleeding them dry and sucking the life essence from their blood.

-1 mat, +1 weapon

 

 

Name: Gorgon's Gaze

Profession: Blacksmith

Rank: 1

ID# 54549

CD: 13 (12 + 1)

Quality: Perfect

Tier: 1

Item Type: One Handed War Hammer

Enhancements: (3/3 slots used)  Paralyze (1 Slot): Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralyzed; Accuracy: +2 BD (2 Slots)

Description: A large one handed Warhammer made of steel. The head of the hammer is shaped in the visage of a a Gorgon, the face of the hammer has a carved ornate eye in the center with a rune of paralysis etched into it's pupil. The end of the hammer is made into the shape of 8 snake heads with their mouths open. The handle is carved in a swirling scaled pattern to replicate the snake-like body of the Gorgon. At the end of the handle, another snake head is ornately carved with small emeralds in it's eyes.

 

-1 mat, +1 weapon

Approved

[Nikodemus_Blackwood 1]

Name: Gáe Derg the Red Javelin

Profession: Blacksmith

Rank: 2

ID# 54696

CD: 13 (12 + 1)

Quality: Perfect

Tier: 1

Item Type: One Handed Assault Spear

Enhancements: (3/3 slots used); +1 damage (1 slot), Accuracy: Adds +1 to the BD, but cannot cause a critical hit. (1 slot), Bleed:  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot)

Description: Gáe Derg the Red Javelin, is a well crafted spear made from honed steel forged to a great sharpness. The haft of the spear is made of a hard Ebony Ironwood and inlaid with thick bands of gold filigree. The collar where the haft meets the blade is crafted into the visage of a Raven with it's wings spread. Extending from it's opened beak is a large 1 foot long, 6 inch wide blade. The blade it engraved with curling knotwork and runic symbols down it's length on both sides. Set within the sockets of the bird's eyes are 2 polished red gemstones that glow with an inner fire. On the opposite end of the haft sits an pommel shaped like a raven's tail. The pommel is 4 inches wide and 8 inches in length and sharpened finely in order to be used to cut and slice if needed. The spear is made in the essence of it's mythological predecessor, said to inflict wounds so terrible that the victims do not survive.

 

 

attempt 2: Bad quality. -1 mat, +1 bad item.

Name: Iron Dagger.

Profession: Blacksmith

Rank: 2

ID# 54697

CD: 5 + 1 = 6

Quality: bad

Tier: 1

Item Type: dagger

Enhancements: None

Description: A poorly low carbon iron dagger. the blade is straight and holds an edge, but after 1 or 2 uses in combat, the item would break or become dull and useless.

 

 

Attempt 3 failed. -1 mat.

ID# 54698

Craft: 2 + 1 = 3

[Oikawa 1]

18 hours ago, Nikodemus_Blackwood said:

Name: Gáe Derg the Red Javelin

Profession: Blacksmith

Rank: 2

ID# 54696

CD: 13 (12 + 1)

Quality: Perfect

Tier: 1

Item Type: One Handed Assault Spear

Enhancements: (3/3 slots used); +1 damage (1 slot), Accuracy: Adds +1 to the BD, but cannot cause a critical hit. (1 slot), Bleed:  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals +8 damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot)

Description: Gáe Derg the Red Javelin, is a well crafted spear made from honed steel forged to a great sharpness. The haft of the spear is made of a hard Ebony Ironwood and inlaid with thick bands of gold filigree. The collar where the haft meets the blade is crafted into the visage of a Raven with it's wings spread. Extending from it's opened beak is a large 1 foot long, 6 inch wide blade. The blade it engraved with curling knotwork and runic symbols down it's length on both sides. Set within the sockets of the bird's eyes are 2 polished red gemstones that glow with an inner fire. On the opposite end of the haft sits an pommel shaped like a raven's tail. The pommel is 4 inches wide and 8 inches in length and sharpened finely in order to be used to cut and slice if needed. The spear is made in the essence of it's mythological predecessor, said to inflict wounds so terrible that the victims do not survive.

 

 

attempt 2: Bad quality. -1 mat, +1 bad item.

Name: Iron Dagger.

Profession: Blacksmith

Rank: 2

ID# 54697

CD: 5 + 1 = 6

Quality: bad

Tier: 1

Item Type: dagger

Enhancements: None

Description: A poorly low carbon iron dagger. the blade is straight and holds an edge, but after 1 or 2 uses in combat, the item would break or become dull and useless.

 

 

Attempt 3 failed. -1 mat.

ID# 54698

Craft: 2 + 1 = 3

Approved.

[Nikodemus_Blackwood 1]

-1 mat, +1 weapon

Name: Thorn's Song

Profession: Blacksmith

Rank: 2

ID# 55186

CD: 10 (9 + 1)

Quality: Uncommon

Tier: 1

Item Type: One Handed Rapier

Enhancements: (1/1 slots)  Bleed:  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified)

Description: A rapier blade made of fine steel laced. It's blade is made primarily for quick deadly thrusts but has the ability to make small quick slashes. The blade can pierce deep through most materials, even some steel plating. When the blade moves, either via thrusts or slashes, it whistles with a high keen that sounds much like the flute's highest cord. The guard is a bell guard with a small engraved rose vine wrapping around it. The pommel is shaped in a stylized rose.

 

Second attempt failed. rolled a 1. -1 material

 

-1 mat, +1 weapon

Name: Plague's Maw

Profession: Blacksmith

Rank: 2

ID# 55188

CD: 12

Quality: Perfect

Tier: 2

Item Type: One Handed Battle Axe

Enhancements: (3/3 Slots)  Accuracy:  Adds +1 to the BD, but cannot cause a critical hit. (1 Slot), Bleed:  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals 16 (8 * 2 tier) damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot), Damage: +2.

Description: A large one handed axe made of a unique black steel. It is shaped in a stylized manner to reflect a demons opened mouth. The actual blade itself emerges from the demon's mouth, it's teeth resting along the flat of the blade on both sides. From the head of the demon to the edge of the blade, it runs a length of 15 inches. The blade has a 4 inch beard on both the upper and lower ends that curve into sharp points. Along the blade there are greenish runic markings, and the edge itself shares this same green coloration. The handle of the blade is made of the same black steel, and it has similar green etchings along it's haft. The end of the handle has a collared pommel formed to a sharp point. The blade is sharpened so finely and holds an edge so well that the slightest swipe can cause a wound to open deeply and bleed profusely.

Edited April 5, 2016 by Nikodemus_Blackwood

[Oikawa 1]

3 hours ago, Nikodemus_Blackwood said:

-1 mat, +1 weapon

Name: Thorn's Song

Profession: Blacksmith

Rank: 2

ID# 55186

CD: 10 (9 + 1)

Quality: Uncommon

Tier: 1

Item Type: One Handed Rapier

Enhancements: (1/1 slots)  Bleed:  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified)

Description: A rapier blade made of fine steel laced. It's blade is made primarily for quick deadly thrusts but has the ability to make small quick slashes. The blade can pierce deep through most materials, even some steel plating. When the blade moves, either via thrusts or slashes, it whistles with a high keen that sounds much like the flute's highest cord. The guard is a bell guard with a small engraved rose vine wrapping around it. The pommel is shaped in a stylized rose.

 

Second attempt failed. rolled a 1. -1 material

 

-1 mat, +1 weapon

Name: Plague's Maw

Profession: Blacksmith

Rank: 2

ID# 55188

CD: 12

Quality: Perfect

Tier: 2

Item Type: One Handed Battle Axe

Enhancements: (3/3 Slots)  Accuracy:  Adds +1 to the BD, but cannot cause a critical hit. (1 Slot), Bleed:  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals 16 (8 * 2 tier) damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified). (1 slot), Damage: +2.

Description: A large one handed axe made of a unique black steel. It is shaped in a stylized manner to reflect a demons opened mouth. The actual blade itself emerges from the demon's mouth, it's teeth resting along the flat of the blade on both sides. From the head of the demon to the edge of the blade, it runs a length of 15 inches. The blade has a 4 inch beard on both the upper and lower ends that curve into sharp points. Along the blade there are greenish runic markings, and the edge itself shares this same green coloration. The handle of the blade is made of the same black steel, and it has similar green etchings along it's haft. The end of the handle has a collared pommel formed to a sharp point. The blade is sharpened so finely and holds an edge so well that the slightest swipe can cause a wound to open deeply and bleed profusely.

approved

[Nikodemus_Blackwood 1]

Name: Wooden shield

Profession: Blacksmith

Rank: 3

ID# 55363

CD: 4 + 1 = 5

Quality: bad

Tier: 1

Item Type: Shield

Enhancements: none

Description: A poor quality wooden shield. A small metal band wraps around the circumference of the shield's edge and it has a metal dome buckle on in the middle of it.

 

Name: Cuirass of the Iron Wall

Profession: Blacksmith

Rank: 3

ID# 55364

CD: 10 + 1

Quality: Rare

Tier: 1

Item Type: Heavy armor

Enhancements: (2/2)   Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used.

Description: A heavy steel cuirass made of fine materials. It is made with many edges and spiked points along it's arms, shoulders, and collar. It's resilience protects it wearer well, and the edges and points can be used to hurt enemies who get to close.

 

Name: Nimbus Light

Profession: Blacksmith

Rank: 3

ID# 55365 

CD: 10 + 1

Quality: Rare

Tier: 1

Item Type: One Handed Battle Axe

Enhancements: (2/2) +1 damage, Accuracy +1 BD

Description: A large one handed axe made of a fine ebony steel. Along it's blade are runic markings that glow green, having powdered minerals from the natural light crystals that form in Nimbus in them. The blade is sharpened to a honed edge and the weight of the weapon allows for better weilding.

 

 

4th attempt failed

Edited April 5, 2016 by Nikodemus_Blackwood

[Oikawa 1]

7 hours ago, Nikodemus_Blackwood said:

Name: Wooden shield

Profession: Blacksmith

Rank: 3

ID# 55363

CD: 4 + 1 = 5

Quality: bad

Tier: 1

Item Type: Shield

Enhancements: none

Description: A poor quality wooden shield. A small metal band wraps around the circumference of the shield's edge and it has a metal dome buckle on in the middle of it.

 

Name: Cuirass of the Iron Wall

Profession: Blacksmith

Rank: 3

ID# 55364

CD: 10 + 1

Quality: Rare

Tier: 1

Item Type: Heavy armor

Enhancements: (2/2)   Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used.

Description: A heavy steel cuirass made of fine materials. It is made with many edges and spiked points along it's arms, shoulders, and collar. It's resilience protects it wearer well, and the edges and points can be used to hurt enemies who get to close.

 

Name: Nimbus Light

Profession: Blacksmith

Rank: 3

ID# 55365 

CD: 10 + 1

Quality: Rare

Tier: 1

Item Type: One Handed Battle Axe

Enhancements: (2/2) +1 damage, Accuracy +1 BD

Description: A large one handed axe made of a fine ebony steel. Along it's blade are runic markings that glow green, having powdered minerals from the natural light crystals that form in Nimbus in them. The blade is sharpened to a honed edge and the weight of the weapon allows for better weilding.

 

 

4th attempt failed

Approved

[Nikodemus_Blackwood 1]

-1 mat. +1 item

Name: Steel Knuckle Strikers

Profession: Blacksmith

Rank: 3

ID# 55566

CD: 6 + 1 = 7

Quality:  Good item

Tier: 1

Item Type: Wild Dance

Enhancements: None

Description: A basic pair of steel rings fused together to form a hand fitting weapon of punching destruction. Their hard alloy allows for maximum usage without typical wear and tear of weaker materials.

 

-1 mat. +1 item

Name: Flamberge

Profession: Blacksmith

Rank: 3

ID# 55568

CD: 6 + 1 = 7

Quality: Good

Tier: 1

Item Type: Two Handed Straight Sword

Enhancements: None

Description: A large two handed sword with a wicked serpentine blade. The curves in the blade edge make it a strange and exotic weapon, catching the opponent off guard at times so that the user can shear them in twain.

 

-1 mat +1 item

Name: Djinn Blade

Profession: Blacksmith

Rank: 3

ID# 55569

CD: 9 + 1 = 10

Quality: Uncommon

Tier: 1

Item Type: One Handed Curved Sword

Enhancements: (1/1) Bleed: On a roll of 9-10, does 8 DMG for 2 turns to enemy mob.

Description: A thin curved scimitar made of a material found in the desert floors of Aincrad. It's thin blade is so precise that it moves like a flash of ethereal light, and cuts so deep that the victim wouldn't register the wound until it began to bleed.

 

fourth attempt failed. 55567 CD of 2 (1+1)

Edited April 6, 2016 by Nikodemus_Blackwood

[Oikawa 1]

1 hour ago, Nikodemus_Blackwood said:

-1 mat. +1 item

Name: Steel Knuckle Strikers

Profession: Blacksmith

Rank: 3

ID# 55566

CD: 6 + 1 = 7

Quality:  Good item

Tier: 1

Item Type: Wild Dance

Enhancements: None

Description: A basic pair of steel rings fused together to form a hand fitting weapon of punching destruction. Their hard alloy allows for maximum usage without typical wear and tear of weaker materials.

 

-1 mat. +1 item

Name: Flamberge

Profession: Blacksmith

Rank: 3

ID# 55568

CD: 6 + 1 = 7

Quality: Good

Tier: 1

Item Type: Two Handed Straight Sword

Enhancements: None

Description: A large two handed sword with a wicked serpentine blade. The curves in the blade edge make it a strange and exotic weapon, catching the opponent off guard at times so that the user can shear them in twain.

 

-1 mat +1 item

Name: Djinn Blade

Profession: Blacksmith

Rank: 3

ID# 55569

CD: 9 + 1 = 10

Quality: Uncommon

Tier: 1

Item Type: One Handed Curved Sword

Enhancements: (1/1) Bleed: On a roll of 9-10, does 8 DMG for 2 turns to enemy mob.

Description: A thin curved scimitar made of a material found in the desert floors of Aincrad. It's thin blade is so precise that it moves like a flash of ethereal light, and cuts so deep that the victim wouldn't register the wound until it began to bleed.

 

fourth attempt failed. 55567 CD of 2 (1+1)

Approved

[Nikodemus_Blackwood 1]

Quest reward for evalutation:

 

Name: Dragon Bone Cuirass
Item Type: heavy armor
Tier: 1 
Quality: Uncommon 
Enhancements: (1/1) HP Regen: Heals you +9 HP per slot after every attack turn from your opponent on a CD roll of 6 or higher.
Description: A steel cuirass with a bone overlay made from dragon remains. The front plate is made from the upper skull of a dragon, the back plate made from overlaying shoulder bones.
Thread: http://www.sao-rpg.com/topic/11850-f3-sp-removing-the-unwanted/?page=2

[Ariel - The Crowned Lion 0]

2 hours ago, Nikodemus_Blackwood said:

Quest reward for evalutation:

 

Name: Dragon Bone Cuirass
Item Type: heavy armor
Tier: 1 
Quality: Uncommon 
Enhancements: (1/1) HP Regen: Heals you +9 HP per slot after every attack turn from your opponent on a CD roll of 6 or higher.
Description: A steel cuirass with a bone overlay made from dragon remains. The front plate is made from the upper skull of a dragon, the back plate made from overlaying shoulder bones.
Thread: http://www.sao-rpg.com/topic/11850-f3-sp-removing-the-unwanted/?page=2

Approved by the newbie:D Enjoy your reward.

[Nikodemus_Blackwood 1]

Name: Plague Knight Armor

Profession: Blacksmith

Rank: 3

ID# 55739

CD: 12 + 1 = 13

Quality: Perfect

Tier: 1

Item Type: Heavy Armor

Enhancements: (3/3) Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you. Regen:  Heals you +9 HP per slot after every attack turn from your opponent on a CD roll of 6 or higher.

Description: A set of black steel armor, covered in glowing green runes made with the powdered crystals from Nimbus to give it's luminescence. The armor is spiked and forged with sharp edges to cause harm to any enemy foolish enough to get too close. The material is a refined ebony steel, allowing for it to be durable and protect the wearer.

-1 mat, +1 item

 

 

Name: Steel War Axe

Profession: Blacksmith

Rank: 3

ID# 55741

CD: 6 + 1 = 7

Quality: Good

Tier: 1

Item Type: Two Handed Battle Axe

Enhancements: none

Description: A basic design 2-handed War Axe. It's twin heads are razor sharp and can cleave through most things with ease. It's long haft is made of reinforced Ironwood.

 

-1 mat, +1 item

 

ID# 55738

Craft: 3    

Loot: 16 Saved mat.

no item, no mat used

 

1 attempt failed -1 mat

Edited April 7, 2016 by Nikodemus_Blackwood

[Val 0]

1 hour ago, Nikodemus_Blackwood said:

Name: Plague Knight Armor

Profession: Blacksmith

Rank: 3

ID# 55739

CD: 12 + 1 = 13

Quality: Perfect

Tier: 1

Item Type: Heavy Armor

Enhancements: (3/3) Damage Mitigation: Removes 9 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. Thorns: Deals +7 damage when Mob/Enemy hits a non-critical hit on you. Regen:  Heals you +9 HP per slot after every attack turn from your opponent on a CD roll of 6 or higher.

Description: A set of black steel armor, covered in glowing green runes made with the powdered crystals from Nimbus to give it's luminescence. The armor is spiked and forged with sharp edges to cause harm to any enemy foolish enough to get too close. The material is a refined ebony steel, allowing for it to be durable and protect the wearer.

-1 mat, +1 item

 

 

Name: Steel War Axe

Profession: Blacksmith

Rank: 3

ID# 55741

CD: 6 + 1 = 7

Quality: Good

Tier: 1

Item Type: Two Handed Battle Axe

Enhancements: none

Description: A basic design 2-handed War Axe. It's twin heads are razor sharp and can cleave through most things with ease. It's long haft is made of reinforced Ironwood.

 

-1 mat, +1 item

 

ID# 55738

Craft: 3    

Loot: 16 Saved mat.

no item, no mat used

 

1 attempt failed -1 mat

Approved. And Approved. And And Approved.

[Nikodemus_Blackwood 1]

Name: Scales of the Dragon God.

Profession: Blacksmith

Rank: 3

ID# 55896

CD: 11 + 1 = 12

Quality: Perfect

Tier: 1

Item Type: Shield

Enhancements: (3/3)  Damage Mitigation:  Removes +18 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots)  Thorns:  Deals  X*7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (1 slot)

Description: An ornate tower shield, made of an ebony steel and laced with dragon scales. Where the scales are, the metal of the ebony steel has been raised around them to ensure a strong fitting and lessen the chance of the scales being broken off by repeated blows. Due to the mixture of strong steel and the hardness of the dragon scales, the shield can take the strongest of attacks and keep the wearer safe from harm. A bonus to having the scales inlaid into the metal is that they have a sharpness to them that will cut and harm any who get to close to the shield.

 

Name: Greaves of The Ram God

Profession: Blacksmith

Rank: 3

ID# 55894

CD: 8 + 1 = 9

Quality: Uncommon

Tier: 1

Item Type: Heavy Armor Greaves

Enhancements: (1/1)  Heavy Momentum:  When you miss, gain a +1 base dmg. This can stack up to the amount of slots used. The +1 dmg goes away after a successful hit.

Description: A unique pair of heavy armored greaves made from an ivory silver and etched with swirls and lines. Along the front of the greaves, raised in the metal, is the image of a ram's head, it's horns curling across the hips and down the thigh a few inches. Much like the deity they are named after, these greaves make the wearer stubborn in their pursuit of dealing damage against their foe.

 

2 bad Items, -2 mats, no chance of salvage

ID# 55893:
Craft: 4 + 1 = 5
&

ID# 55895:
Craft: 4 + 1 = 5

 

Results: -4 materials, +4 items, 2 bad, 1 uncommon, 1 perfect.

13 EXP overall

Edited April 8, 2016 by Nikodemus_Blackwood

[Ariel - The Crowned Lion 0]

1 hour ago, Nikodemus_Blackwood said:

Name: Scales of the Dragon God.

Profession: Blacksmith

Rank: 3

ID# 55896

CD: 11 + 1 = 12

Quality: Perfect

Tier: 1

Item Type: Shield

Enhancements: (3/3)  Damage Mitigation:  Removes +18 points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. (2 slots)  Thorns:  Deals  X*7 damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used. (1 slot)

Description: An ornate tower shield, made of an ebony steel and laced with dragon scales. Where the scales are, the metal of the ebony steel has been raised around them to ensure a strong fitting and lessen the chance of the scales being broken off by repeated blows. Due to the mixture of strong steel and the hardness of the dragon scales, the shield can take the strongest of attacks and keep the wearer safe from harm. A bonus to having the scales inlaid into the metal is that they have a sharpness to them that will cut and harm any who get to close to the shield.

 

Name: Greaves of The Ram God

Profession: Blacksmith

Rank: 3

ID# 55894

CD: 8 + 1 = 9

Quality: Uncommon

Tier: 1

Item Type: Heavy Armor Greaves

Enhancements: (1/1)  Heavy Momentum:  When you miss, gain a +1 base dmg. This can stack up to the amount of slots used. The +1 dmg goes away after a successful hit.

Description: A unique pair of heavy armored greaves made from an ivory silver and etched with swirls and lines. Along the front of the greaves, raised in the metal, is the image of a ram's head, it's horns curling across the hips and down the thigh a few inches. Much like the deity they are named after, these greaves make the wearer stubborn in their pursuit of dealing damage against their foe.

 

2 bad Items, -2 mats, no chance of salvage

ID# 55893:
Craft: 4 + 1 = 5
&

ID# 55895:
Craft: 4 + 1 = 5

The presented rolls are nullified and you don't receive any items or crafting exp, neither do you lose the materials used in their 'pseudo creation'.

First of all, you linked the roll ID to this thread instead of a post in your shop. You can craft items only inside your own shop (thread) which is here. In this thread you can only submit created items (rewards and the occasional familiar) for approval. For any more information please feel free to send me a PM.