Jump to content

Khrysaor's Loots and Crafts Evaluation


Recommended Posts

Happened during a loot drop from boar.

Uncommon Item:

ID# 56622

LD: 19

Thread Link

Spoiler

 

Name: Metallic Hammer 

Quality: Uncommon

Tier: 1

Item Type: Tool (HAMMER)

Enhancements: (1/1)   Crafting Die - Adds +1 to the CD when crafting in a shop.

Description: Is a nice and sturdy hammer. Made of Silver metal and the color is silver from the handle to the body of the hammer.

 

 

Link to post
Share on other sites
1 hour ago, Khrysaor said:

Name: Metallic Hammer 

Quality: Uncommon

Tier: 1

Item Type: Tool (HAMMER)

Enhancements: (1/1)   Crafting Die - Adds +1 to the CD when crafting in a shop.

Description: Is a nice and sturdy hammer. Made of Silver metal and the color is silver from the handle to the body of the hammer.

eC4VqC5.png
Denied for two reasons:

  1. You did not link that specific roll ID with the actual post it was used in, you linked it with the general address of the thread which is not accepted.
    All perma rolls must be linked to the actual post in which they are going to be used or else they don't count and all actions associated with them will be nullified.
  2. That specific enhancement cannot be applied on an Uncommon item has only 1 available enhancement slot that can be used so the enhancement 'Crafting Die' that costs 3 enhancement slots cannot be applied on one. The item it can be applied on must be a Perfect item that has a total of  3 enhancement slots.

Please make the necessary changes and resubmit the item in a new post here. For any information or additional information, PM me.

Link to post
Share on other sites

This time I linked the dice roll with the posts, and thanks for clearing my confusion from before. Happened during a loot drop from boar.

Uncommon Item:

ID# 56746

LD: 20

Thread Link

Post Link

  Hide contents

Name: Fangs of the Underworld

Quality: Uncommon

Tier: 1

Item Type: Weapon (ONE-HANDED CURVED SWORD)

Enhancements: (1/1)   Bleed -  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified)

Description: Its a good sword. It looks like a fang, but curved, and blood red colored.

Link to post
Share on other sites
2 hours ago, Khrysaor said:

This time I linked the dice roll with the posts, and thanks for clearing my confusion from before. Happened during a loot drop from boar.

Uncommon Item:

ID# 56746

LD: 20

Thread Link

Post Link

  Hide contents

Name: Fangs of the Underworld

Quality: Uncommon

Tier: 1

Item Type: Weapon (ONE-HANDED CURVED SWORD)

Enhancements: (1/1)   Bleed -  Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified)

Description: Its a good sword. It looks like a fang, but curved, and blood red colored.

P31kUKX.png
Congrats on you new bleeding weapon.
Additional Info: Now that this is approved you can actually equip it in the next post of that thread.

Link to post
Share on other sites
  • 3 weeks later...

Made in the store.

+2 Uncommon Items

ID# 57277

CD: 10

Thread Link

Post Link

Spoiler

 

Name: Ame no Murakumo

Quality: Uncommon

Tier: 1

Item Type: Weapon (One-Handed Curved Sword)

Enhancements: (1/1)   Paralyze- Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralyzed. 1 Slot Used

Description: A curved sword which is brownish-green in color. Handles has a lot of curves to it and can be held sturdily. at the tip of blade there is a small separation increasing the width of the blade at the tip.

Image:

latest?cb=20130703134809

and

ID# 57278

CD: 10

Thread Link

Post Link

Spoiler

Name: Mjolnir

Quality: Uncommon

Tier: 1

Item Type: Weapon (Two-Handed War Hammer)

Enhancements: (1/1)   Accuracy  Adds +1 to the BD, but cannot cause a critical hit. 1 Slot Used

Description: A metallic-silver hammer.

Image:

latest?cb=20140129001244

 

 

Link to post
Share on other sites
On 5/7/2016 at 5:42 AM, Khrysaor said:

Made in the store.

+2 Uncommon Items

ID# 57277

CD: 10

Thread Link

Post Link

  Hide contents

 

Name: Ame no Murakumo

Quality: Uncommon

Tier: 1

Item Type: Weapon (One-Handed Curved Sword)

Enhancements: (1/1)   Paralyze- Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralyzed. 1 Slot Used

Description: A curved sword which is brownish-green in color. Handles has a lot of curves to it and can be held sturdily. at the tip of blade there is a small separation increasing the width of the blade at the tip.

Image:

latest?cb=20130703134809

and

ID# 57278

CD: 10

Thread Link

Post Link

  Hide contents

Name: Mjolnir

Quality: Uncommon

Tier: 1

Item Type: Weapon (Two-Handed War Hammer)

Enhancements: (1/1)   Accuracy  Adds +1 to the BD, but cannot cause a critical hit. 1 Slot Used

Description: A metallic-silver hammer.

Image:

latest?cb=20140129001244

 

 

Approved!

Link to post
Share on other sites

Made in Store:

+1 Perfect Item

ID# 57621

CD: 12

Thread Link

Post Link

Spoiler

Name: Silver Scimitar

Quality: Perfect

Tier: 1

Item Type: Weapon (One-Handed Curved Sword)

Enhancements: (3/3) 

Bleed- Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) - 2 Slots Used. 

Paralyze - Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. - 1 Slot Used.

Description: A curved sword which is grey at the hilt and slowly becomes mores silver in color as you go to the tip of the blade. Actual blade is made out of silver. Enough grooves on the hilt that helps for a more sturdier grip.

Image:

036cafecac637009741bbd6d14f546da.jpg

 

+1 Rare Item

ID# 57622

CD: 11

Thread Link

Post Link

Spoiler

Name: Seikaku (Claymore)

Quality: Rare

Tier: 1

Item Type: Weapon (One-Handed Straight Sword)

Enhancements: (2/2)  Accuracy - Adds +1 to the BD, but cannot cause a critical hit. 2 Slots Used.

Description: A straight sword bright silvered colored blade, with the hilt a black color. Simple design, easy maneuverability. Easy to hold and use.

Image:

Scottish claymore replica (Albion Chieftain)2.jpg

 

Link to post
Share on other sites
5 hours ago, Khrysaor said:

Made in Store:

+1 Perfect Item

ID# 57621

CD: 12

Thread Link

Post Link

Name: Silver Scimitar

Quality: Perfect

Tier: 1

Item Type: Weapon (One-Handed Curved Sword)

Enhancements: (3/3) 

Bleed- Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) - 2 Slots Used. 

Paralyze - Removed enemy action for 1 turn afterwards on a roll of 9-10 if one slot is used, and 8-10 if two slots are used. This only applies to natural rolls (unmodified). Removes evasion properties from opponent while paralysed. - 1 Slot Used.

Description: A curved sword which is grey at the hilt and slowly becomes mores silver in color as you go to the tip of the blade. Actual blade is made out of silver. Enough grooves on the hilt that helps for a more sturdier grip.

 

+1 Rare Item

ID# 57622

CD: 11

Thread Link

Post Link

Name: Seikaku (Claymore)

Quality: Rare

Tier: 1

Item Type: Weapon (One-Handed Straight Sword)

Enhancements: (2/2)  Accuracy - Adds +1 to the BD, but cannot cause a critical hit. 2 Slots Used.

Description: A straight sword bright silvered colored blade, with the hilt a black color. Simple design, easy maneuverability. Easy to hold and use.

P31kUKX.png
Suggestion box: Please use the evaluation template found HERE for your next submissions. 

Link to post
Share on other sites
  • 3 weeks later...

These are two items that were made in the shop.

Spoiler

Name: Thorny
Your Profession: Blacksmith
Your Rank: 3
ID:  58673
Roll: 11
Item Type: Shield
Tier: 1
Quality: Rare
Enhancements: (2/2) Thorns: Deals  X* (7 * Tier Level) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used - USED 2 SLOTS
Description: A oval like shield that rests on the players forearm. Not needed to be held. With thorns like spikes protruding out of the surface of the shield.

 

Spoiler

Name: Chainmail ShoulderWrap
Your Profession: Blacksmith
Your Rank: 3
ID:  58937
Roll: 13
Item Type: Heavy Armor
Tier: 1
Quality: Perfect
Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 3 SLOTS USED
Description: Heavy armor that is worn on the shoulder. Made from chainmail metal. Many interlocking metal all held together, and black in color. Allows for easy mobility of the shoulder joint and flexibility.

 

Link to post
Share on other sites
43 minutes ago, Khrysaor said:

These are two items that were made in the shop.

  Reveal hidden contents

Name: Thorny
Your Profession: Blacksmith
Your Rank: 3
ID:  58673
Roll: 11
Item Type: Shield
Tier: 1
Quality: Rare
Enhancements: (2/2) Thorns: Deals  X* (7 * Tier Level) damage when Mob/Enemy hits a non-critical hit on you, where X is amount of slots used - USED 2 SLOTS
Description: A oval like shield that rests on the players forearm. Not needed to be held. With thorns like spikes protruding out of the surface of the shield.

 

  Reveal hidden contents

Name: Chainmail ShoulderWrap
Your Profession: Blacksmith
Your Rank: 3
ID:  58937
Roll: 13
Item Type: Heavy Armor
Tier: 1
Quality: Perfect
Enhancements: (3/3) Damage Mitigation: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 3 SLOTS USED
Description: Heavy armor that is worn on the shoulder. Made from chainmail metal. Many interlocking metal all held together, and black in color. Allows for easy mobility of the shoulder joint and flexibility.

 

accepted.gif

But next time, please add the regular roll with a +1 For your item. I saw that 13 for a roll and scared me to death XD

Link to post
Share on other sites

Two Perfects made in the shop, and I fixed it to putting down the original roll with a +1.

Spoiler

Name: Steely Plate
Your Profession: Blacksmith
Your Rank: 3
ID:  58938
Roll: 11 + 1 = 12
Item Type: Heavy Armor
Tier: 1
Quality: Perfect
Enhancements: (3/3)

Damage Mitigation: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

Regen: Heals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Nice even curved and flat body to the armor. Silver colored metal. Made of steel.

Spoiler

Name: Night's Fall
Your Profession: Blacksmith
Your Rank: 3
ID:  58939
Roll: 12 + 1 = 13
Item Type: Shield
Tier: 1
Quality: Perfect
Enhancements: (3/3)

Thorns: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

RegenHeals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Diamond shaped shield. Length is long. Thicker in the center but as the metal goes outwards from center the thickness gradually becomes thinner. Black colored metal.

 

Link to post
Share on other sites
5 hours ago, Khrysaor said:

Two Perfects made in the shop, and I fixed it to putting down the original roll with a +1.

  Reveal hidden contents

Name: Steely Plate
Your Profession: Blacksmith
Your Rank: 3
ID:  58938
Roll: 11 + 1 = 12
Item Type: Heavy Armor
Tier: 1
Quality: Perfect
Enhancements: (3/3)

Damage Mitigation: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

Regen: Heals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Nice even curved and flat body to the armor. Silver colored metal. Made of steel.

  Reveal hidden contents

Name: Night's Fall
Your Profession: Blacksmith
Your Rank: 3
ID:  58939
Roll: 12 + 1 = 13
Item Type: Shield
Tier: 1
Quality: Perfect
Enhancements: (3/3)

Thorns: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

RegenHeals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Diamond shaped shield. Length is long. Thicker in the center but as the metal goes outwards from center the thickness gradually becomes thinner. Black colored metal.

 

accepted.gif

Link to post
Share on other sites
  • 1 month later...

Two perfects made in shop.

Spoiler

Name: <<Embodiment of Apophis>>
Your Profession: Blacksmith
Your Rank: 3
ID
59013
Roll 11 + 1 = 12
Item Type: [Weapon – One Handed Curved Sword]
Tier: [1]
Quality: [Perfect]
Enhancements: [ Slot 1: +1 Damage, Slot 2 & 3: Paralysis]

Description: The <<Embodiment of Apophis>> is a <<One-Handed Curved Sword>> type weapon which resembles a fusion between the Japanese katana and the Persian Kilij, the blade being that of the Kilij whereas its guard and handle are those of a katana.

Parts

Blade:  

The blade is 27 inches long and the width of the blade stays narrow (with a slight taper) up until the last 30% of its length is wider and slightly more flared outward than is the rest of the blade. The finish on the leading (cutting) edge of blade (the entirety of which is razor sharp) slowly undulates where it has been put the quenching process. The rest of the blade excluding this undulating pattern is thicker and shows two parallel lines (in silver inlay) following the grain pattern of the metal used for the blade. These lines are composed of microscopic lightning shaped lines composed crystals of martensite embedded in a pearlite matrix. One side of the blade shows engraved hieroglyphs spelling out a paralysis curse and the other side sports the same curse engraved in Japanese characters, both in gold inlay. The body of the blade is made of black colored Wootz steel.

 

Spoiler

000375.jpg

 

 

Guard (and the part between the blade and the handle): 

 

Spoiler

Buy-Tsuba-Dragon-Solid-Copper-Brass-Tsub

 

The end part of the blade above the tang (the part that fits into the hollow of the handle) is covered with a wedge shaped metal collar that keeps the sword from falling out of the scabbard and to support the fittings below. This is followed by a large oval-shaped gold metal hand-guard with a silver inlay of the Yamata-no- Orochi (seven headed serpent monster in Japanese mythology) with washers in the form of Apep (Egyptian serpent demon of destruction) fitted above and below the hand-guard which in turn is fitted around a cap-like collar which surrounds the hollow end of the handle of this sword, thus securing the fitting of the tang of the blade into the hollow in the handle. Lastly there is a small peg which locks the tang of the blade into the handle.

The handle of this sword is 9 inches in length and is made of a single thick bar of gold metal. It is studded with small, diamond shaped nubs of gold metal for the purpose of increasing the grip on the handle. This handle is wrapped in navy blue colored silk which covers the nubs of gold metal on it. The handle’s end is encapsulated in a rectangular, thick black Wootz steel pommel.

 

Spoiler

Tsuka.JPG

 

Scabbard (Sheath):

 

Spoiler

Whosale-Katana-Fully-black-handle-black-

 

This is made of a hollowed out gold metal bar which has been molded to fit the blade inside it and has a protective fitting at the end made of a small but thick rectangular piece of black Wootz steel. About 3 inches or so below the opening of the scabbard (which has a brace to secure the blade inside itself the scabbard), there is a small knob around which is tied a thick navy blue silk cord which is used to link the scabbard to the belt. To finish the scabbard has silver inlay which depicts the form of Seiryuu the Azure Dragon of the East on one side and on the other side, there is another silver inlay which depicts Wadjet (a snake goddess in Egyptian mythology).

 

Spoiler

Name: Night's Fall
Your Profession: Blacksmith
Your Rank: 3
ID:  59014
Roll: 12 + 1 = 13
Item Type: Shield
Tier: 1
Quality: Perfect
Enhancements: (3/3)

Thorns: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

RegenHeals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Diamond shaped shield. Length is long. Thicker in the center but as the metal goes outwards from center the thickness gradually becomes thinner. Black colored metal.

 

Link to post
Share on other sites
  • 2 weeks later...
On 7/7/2016 at 7:26 AM, Khrysaor said:

Two perfects made in shop.

  Hide contents

Name: <<Embodiment of Apophis>>
Your Profession: Blacksmith
Your Rank: 3
ID
59013
Roll 11 + 1 = 12
Item Type: [Weapon – One Handed Curved Sword]
Tier: [1]
Quality: [Perfect]
Enhancements: [ Slot 1: +1 Damage, Slot 2 & 3: Paralysis]

Description: The <<Embodiment of Apophis>> is a <<One-Handed Curved Sword>> type weapon which resembles a fusion between the Japanese katana and the Persian Kilij, the blade being that of the Kilij whereas its guard and handle are those of a katana.

Parts

Blade:  

The blade is 27 inches long and the width of the blade stays narrow (with a slight taper) up until the last 30% of its length is wider and slightly more flared outward than is the rest of the blade. The finish on the leading (cutting) edge of blade (the entirety of which is razor sharp) slowly undulates where it has been put the quenching process. The rest of the blade excluding this undulating pattern is thicker and shows two parallel lines (in silver inlay) following the grain pattern of the metal used for the blade. These lines are composed of microscopic lightning shaped lines composed crystals of martensite embedded in a pearlite matrix. One side of the blade shows engraved hieroglyphs spelling out a paralysis curse and the other side sports the same curse engraved in Japanese characters, both in gold inlay. The body of the blade is made of black colored Wootz steel.

 

  Reveal hidden contents

000375.jpg

 

 

Guard (and the part between the blade and the handle): 

 

  Reveal hidden contents

Buy-Tsuba-Dragon-Solid-Copper-Brass-Tsub

 

The end part of the blade above the tang (the part that fits into the hollow of the handle) is covered with a wedge shaped metal collar that keeps the sword from falling out of the scabbard and to support the fittings below. This is followed by a large oval-shaped gold metal hand-guard with a silver inlay of the Yamata-no- Orochi (seven headed serpent monster in Japanese mythology) with washers in the form of Apep (Egyptian serpent demon of destruction) fitted above and below the hand-guard which in turn is fitted around a cap-like collar which surrounds the hollow end of the handle of this sword, thus securing the fitting of the tang of the blade into the hollow in the handle. Lastly there is a small peg which locks the tang of the blade into the handle.

The handle of this sword is 9 inches in length and is made of a single thick bar of gold metal. It is studded with small, diamond shaped nubs of gold metal for the purpose of increasing the grip on the handle. This handle is wrapped in navy blue colored silk which covers the nubs of gold metal on it. The handle’s end is encapsulated in a rectangular, thick black Wootz steel pommel.

 

  Reveal hidden contents

Tsuka.JPG

 

Scabbard (Sheath):

 

  Reveal hidden contents

Whosale-Katana-Fully-black-handle-black-

 

This is made of a hollowed out gold metal bar which has been molded to fit the blade inside it and has a protective fitting at the end made of a small but thick rectangular piece of black Wootz steel. About 3 inches or so below the opening of the scabbard (which has a brace to secure the blade inside itself the scabbard), there is a small knob around which is tied a thick navy blue silk cord which is used to link the scabbard to the belt. To finish the scabbard has silver inlay which depicts the form of Seiryuu the Azure Dragon of the East on one side and on the other side, there is another silver inlay which depicts Wadjet (a snake goddess in Egyptian mythology).

 

  Hide contents

Name: Night's Fall
Your Profession: Blacksmith
Your Rank: 3
ID:  59014
Roll: 12 + 1 = 13
Item Type: Shield
Tier: 1
Quality: Perfect
Enhancements: (3/3)

Thorns: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

RegenHeals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Diamond shaped shield. Length is long. Thicker in the center but as the metal goes outwards from center the thickness gradually becomes thinner. Black colored metal.

 

http://s5.postimg.org/n6er1fr2f/Tick.png 
Approved! :D 

Link to post
Share on other sites
  • 3 months later...

3 perfects made in shop

Spoiler

Name: Zantetsuken

Your Profession: Blacksmith
Your Rank: 4
ID:  70510
Roll: 11 + 1 = 12

Quality: Perfect

Tier: 2

Item Type: Weapon (One-Handed Curved Sword)

Enhancements: (3/3) 

Damage - Adds +(1 * Tier Level) base damage for every slot used. - 1 Slot Used.

Bleed- Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) - 1 Slots Used. 

Accuracy - Adds +1 to the BD, but cannot cause a critical hit. - 1 Slot Used.

Description: A curved sword which is grey at the hilt and slowly becomes mores silver in color as you go to the tip of the blade. Actual blade is made out of silver. Enough grooves on the hilt that helps for a more sturdier grip.

Image

036cafecac637009741bbd6d14f546da.jpg

Spoiler

Name: Armament Infused Chestplate
Your Profession: Blacksmith
Your Rank: 4
ID:  70511
Roll: 12 + 1 = 13
Item Type: Heavy Armor
Tier: 2
Quality: Perfect
Enhancements: (3/3)

Damage Mitigation: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

Regen: Heals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Nice even curved and flat body to the armor. Silver colored metal. Made of steel.

Spoiler

Name: Kuroi Ryu
Your Profession: Blacksmith
Your Rank: 3
ID:  70533
Roll: 11 + 1 = 12
Item Type: Shield
Tier: 2
Quality: Perfect
Enhancements: (3/3)

Thorns: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

RegenHeals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Diamond shaped shield. Length is long. Thicker in the center but as the metal goes outwards from center the thickness gradually becomes thinner. Black colored metal, with a silver outline of a dark black dragon in the center.

Image

Image result for black dragon shield

 

Link to post
Share on other sites
On 11/13/2016 at 10:15 AM, Khrysaor said:

3 perfects made in shop

  Reveal hidden contents

Name: Zantetsuken

Your Profession: Blacksmith
Your Rank: 4
ID:  70510
Roll: 11 + 1 = 12

Quality: Perfect

Tier: 2

Item Type: Weapon (One-Handed Curved Sword)

Enhancements: (3/3) 

Damage - Adds +(1 * Tier Level) base damage for every slot used. - 1 Slot Used.

Bleed- Activated on a roll of 9-10 with one slot, or 8-10 with two slots. Deals (8 * Tier Level) of damage for 2 turns for the enemy/mob. This only applies to natural rolls (unmodified) - 1 Slots Used. 

Accuracy - Adds +1 to the BD, but cannot cause a critical hit. - 1 Slot Used.

Description: A curved sword which is grey at the hilt and slowly becomes mores silver in color as you go to the tip of the blade. Actual blade is made out of silver. Enough grooves on the hilt that helps for a more sturdier grip.

Image

036cafecac637009741bbd6d14f546da.jpg

  Reveal hidden contents

Name: Armament Infused Chestplate
Your Profession: Blacksmith
Your Rank: 4
ID:  70511
Roll: 12 + 1 = 13
Item Type: Heavy Armor
Tier: 2
Quality: Perfect
Enhancements: (3/3)

Damage Mitigation: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

Regen: Heals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Nice even curved and flat body to the armor. Silver colored metal. Made of steel.

  Reveal hidden contents

Name: Kuroi Ryu
Your Profession: Blacksmith
Your Rank: 3
ID:  70533
Roll: 11 + 1 = 12
Item Type: Shield
Tier: 2
Quality: Perfect
Enhancements: (3/3)

Thorns: Removes (9 * Tier Level) points of damage from every hit to you for every slot used. No matter how much damage mitigation you have, however, you will always take at least 1 point of damage. 2 SLOTS USED

RegenHeals you +(9 * Tier Level) per slot after every attack turn from your opponent on a CD roll of 6 or higher. 1 SLOT USED


Description: Diamond shaped shield. Length is long. Thicker in the center but as the metal goes outwards from center the thickness gradually becomes thinner. Black colored metal, with a silver outline of a dark black dragon in the center.

Image

Image result for black dragon shield

 

Approved. Sorry for the long wait!

Link to post
Share on other sites
  • 5 weeks later...

2 Uncommon and 1 Perfect in shop

Perfect

Spoiler

Name: Fang of the Water Serpent
Profession: Blacksmith
Rank: 4
ID: ID# 72337
Roll: 11 + 1 = 12
Item Type: Weapon
Tier: 2
Quality: Perfect
Enhancements: Damage (3)
Description: A one handed spear. The tip is silver and slightly curved, it reflects any natural light brightly.  The main shaft of the spear is grey and engraved with an intricate design of a river which is a dark blue.

Uncommon

Spoiler

Name: Regen Chest Plate
Profession: Blacksmith
Rank: 4
ID: ID# 72338
Roll: 8 + 1 = 9
Item Type: Armor
Tier: 2
Quality: Uncommon
Enhancements: Regen (1)
Description: Curved on the top, but becomes more flat lower down. Silver colored.

Spoiler

Name: Regen Shield
Profession: Blacksmith
Rank: 4
ID: ID# 72339
Roll: 8 + 1 = 9
Item Type: Shield
Tier: 1
Quality: Uncommon
Enhancements: Regen (1)
Description: Diamond shaped, silver colored shield. Worn on the right arm.

 

Link to post
Share on other sites
On 12/14/2016 at 8:32 PM, Khrysaor said:

2 Uncommon and 1 Perfect in shop

Perfect

  Hide contents

Name: Fang of the Water Serpent
Profession: Blacksmith
Rank: 4
ID: ID# 72337
Roll: 11 + 1 = 12
Item Type: Weapon
Tier: 2
Quality: Perfect
Enhancements: Damage (3)
Description: A one handed spear. The tip is silver and slightly curved, it reflects any natural light brightly.  The main shaft of the spear is grey and engraved with an intricate design of a river which is a dark blue.

Uncommon

  Hide contents

Name: Regen Chest Plate
Profession: Blacksmith
Rank: 4
ID: ID# 72338
Roll: 8 + 1 = 9
Item Type: Armor
Tier: 2
Quality: Uncommon
Enhancements: Regen (1)
Description: Curved on the top, but becomes more flat lower down. Silver colored.

  Hide contents

Name: Regen Shield
Profession: Blacksmith
Rank: 4
ID: ID# 72339
Roll: 8 + 1 = 9
Item Type: Shield
Tier: 1
Quality: Uncommon
Enhancements: Regen (1)
Description: Diamond shaped, silver colored shield. Worn on the right arm.

 

P31kUKX.png

Link to post
Share on other sites

2 perfects in shop

 

Spoiler

Name: Armor of the Water Serpent
Profession: Blacksmith
Rank: 5
ID: ID# 72530
Roll: 11 + 1 = 12
Item Type: Heavy Armor
Tier: 2
Quality: Perfect
Enhancements: Heavy Momentum (2) Regen (1)
Description:  A black set of armor with deep blue edges. The armor is plated with wave like patterns coming away from the shoulders. A three headed water serpent coils around the main body of the armor and up to the neck where it's heads rest.

Spoiler

Name: Shield of the Drowned
Profession: Blacksmith
Rank: 5
ID: ID# 72855
Roll: 12 + 1 = 13
Item Type: Shield
Tier: 2
Quality: Perfect
Enhancements: Mitigation (3)
Description: A medium sized shield pitch black in color. Intricate waves flow around the whole shield and towards the center there is a engraving of a creature from the depths dragging its prey down with it. The picture looks to resemble characteristics of a dragon, however only it's eyes are a vivid blue the rest of the image is faded.

 

Link to post
Share on other sites
7 minutes ago, Khrysaor said:

2 perfects in shop

 

  Hide contents

Name: Armor of the Water Serpent
Profession: Blacksmith
Rank: 5
ID: ID# 72530
Roll: 11 + 1 = 12
Item Type: Heavy Armor
Tier: 2
Quality: Perfect
Enhancements: Heavy Momentum (2) Regen (1)
Description:  A black set of armor with deep blue edges. The armor is plated with wave like patterns coming away from the shoulders. A three headed water serpent coils around the main body of the armor and up to the neck where it's heads rest.

  Hide contents

Name: Shield of the Drowned
Profession: Blacksmith
Rank: 5
ID: ID# 72855
Roll: 12 + 1 = 13
Item Type: Shield
Tier: 2
Quality: Perfect
Enhancements: Mitigation (3)
Description: A medium sized shield pitch black in color. Intricate waves flow around the whole shield and towards the center there is a engraving of a creature from the depths dragging its prey down with it. The picture looks to resemble characteristics of a dragon, however only it's eyes are a vivid blue the rest of the image is faded.

 

Approved.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...