[F9-Smith(R10/Max) Tristram Molten Steelshaping (Closed)

[Griswold 0]

Griswold floor 9, the massive heat pounding down on him looking at the hot environment. Griswold enters it and sees it filled to the brim with all the tools he will need to forge. With just a pat on the chest with his fist "Perfect, Time to get to work"


Looking at his shop Griswold takes inventory to make sure he isn't missing any equipment:
» A Worn Down hammer on sitting on an Anvil, Griswold takes note saying "Ah look at the hunk of junk, it will do but ill need something better soon."
» A pair of Mythril Pliers, made of a metal unknown by Griswold.
» A Furnace with a circular open top, for easy heating and retrieval
» A pair of shaping hammers, made of a green metal unknown to Griswold.

 

Pick Ups: Spoiler Name: Murasame α Profession: Blacksmith Rank: 10 Roll ID: 155101 Roll Result: 10+1 Item Type: Katana Tier: 2 Quality: Perfect Enhancements: Bleed 1, Accuracy 2 Post Link: Here Description: A blade of ebony shinogi and quicksilver hamon and ha, the edge is razor sharp which digs deep reducing a wounds ability to clot. A beautiful blood carbonate alloy comprises the sheath, creating a exquisite albeit grim looking blade. On the butt of the handle is a small brand appearing as a celtic knot, of Tristram Steel.
In Stock: Spoiler a
Pricing: Spoiler T1/Uncommon: 360 Col or 1 T1(Or Greater) Material T1/Rare: 515 Col or 2 T1(Or Greater) Materials T1/Perfect: 1200 Col or 4 T1(Or Greater) Materials T2/Uncommon: 720 Col or 1 T2(Or Greater) Material T2/Rare: 1030 Col or 2 T2(Or Greater) Materials T2/Perfect: 2400 Col or 4 T2(Or Greater) Materials T3/Uncommon: 1440 Col or 1 T3(Or Greater) Material T3/Rare: 2060 Col or 2 T3(Or Greater) Materials T3/Perfect: 4800 Col or 5 T3(Or Greater) Materials	The Furnace (Exp/Rank): Spoiler Rank 10: 8407/???? Exp   Crafts a Day: 13 [+2 Trading Hall] ►Rank 10 [1] = Critical failure (Lose materials) EXP: 6 (+2 Trading Hall,+2 Workshop, +1 Ambition) [2-3] = Salvage (Keep materials on LD 6+ [Trading Hall: +5]) EXP: 7 (+2 Trading Hall,+2 Workshop, +1 Ambition) [4-6] = Uncommon item (1 slot) EXP: 8 (+2 Trading Hall,+2 Workshop, +1 Ambition) [7-10] = Rare item (2 slots) EXP: 10 (+2 Trading Hall,+2 Workshop, +1 Ambition) [11-12] = Perfect item (3 slots) EXP: 13 (+2 Trading Hall,+2 Workshop, +1 Ambition)
Metals Discovered/Identified: Spoiler Adamantine (Alloy, Malacite + Darksteel) Blood Carbon (Base Metal) Blood Carbonate Steel (Alloy, Darksteel + Blood Carbon) Bronze (Alloy, Copper + Tin) Brozahrium (Alloy, Bronze + Solarite) Cadrium (Alloy, Solarite + Magmir) Cobalt (Base Metal) Copper (Base Metal) Crusite (Alloy, Mythril + Blood Carbon) Darksteel (Base Metal) Dixtonium (Base Metal) Fabrinine (Alloy, Malacite + Silver) Gold (Base Metal) Iron (Base Metal) Irridesium (Alloy, Darksteel + Orichalcum) Lead (Base Metal) Magmir (Base Metal) Malachite (Base Metal) Mythril (Base Metal) Orichalcum (Alloy, Malacite + Cobalt) Osmium (Base Metal) Quicksilver (Alloy, Silver + Mythril) Scarletite (Alloy, Blood Carbon + Quicksilver) Tsano (Base Metal) DISCLAIMER: THIS IS NOT NECESSARY TO DO AS A BLACKSMITH, THIS IS FOR RP REASONS ONLY	Order Form: Spoiler Expect an errata added to the description, it is typical for a smith to sign his work with a brand. Name:   Profession: Blacksmith Rank: 10 Roll ID:   Roll Result:   Item Type:   Tier:   Quality:   Enhancements:   Post Link: Here Description:

Edited December 7, 2020 by Griswold

[Griswold 0]

Griswold takes a piece of Iron ore, the material he is most familiar with IRL. Heating it in the trough furnace the ore heats and becomes shape-able. Griswold pulls the metal out with his tongs and gets shaping, hammering against it with the rusted hammer. It begins to glow as Griswold pounds and pounds on it with the hammer, shaping a sword. While glowing signalling the near completion of crafting, he pulls up the green tools and quickly etches his symbol into the metal hilt and cuts off excess metal.

Crafting Dice: 5

Quality: Bad

Exp: 1

[Griswold 0]

Griswold takes a hunk of the blue metal, and proceeds to heat it to a workable state. Heated up its a hot orange, Griswold pulls it out with tongs and begins to hammer on it with the rusted hammer. Given Griswolds limited equipment his real world experience comes to help him produce a section of chain. The Chain glows as he etches his emblem into it, and removing the excess metal from the rings. Using the tongs to cool the craft in water, as it forms a sheen rich dark blue.

Crafting Dice: 11

Quality: Rare

Exp: 5

Item: Chains of The Forgemaster

Quality: Rare

Shop: Tristram Molten Steelshaping

Description: These cobalt chains affixed to the handle of a weapon hold the weapon tighter in your grip. +2 One-Handed War Hammer

Approved!

[Griswold 0]

Griswold prepares his furnace, Heating the entire collection of Iron ores in the furnace. The metal heats into an orange as it becomes fluid, Griswold begins straining out the impurities in the metal. Pouring the molten metals into bar molds, he sets them aside to cool for use later.

Ore Used: 2*Iron Ores

Bar Obtained: 2*Iron Ingots

[Griswold 0]

Griswold takes the weird gold ore, which doesn't seem to be actual gold. Heating it the furnace it melts, and changes a mixed gold green color curiously. Griswold removes the impurities from the metal before pouring it into an ingot mold. Setting them aside with the Iron ingots crafted earlier.

Ore Used:2* Golden Ore (Gold?)

Bar Obtained:2*Gold-Green Ingots(?)

[Griswold 0]

Griswold takes the silver ore from the pile, and thrusts it into the furnace. Watching it melt down, Griswold scrapes off the impurities. Pouring it into ingot molds, Griswold sets them aside one at a time next to his accumulating pile of metal bars.

Ore Used: 2* Silver ore

Bar Obtained: 2*Silver Ingot

[Griswold 0]

Continuing on in his smelting, Griswold grabs the black ores from the pile. One by one they are stuffed into the furnace for smelting. Heating to an orange glow, they become fluid as the slag becomes exposed. Griswold removes the slag and pours the pure metal, filling up four Ingot molds.

Ore Used:4* Black Ore (?)

Bar Obtained:4* Black Ingots (?)

[Griswold 0]

Griswold grabs one of his cooled gold green ingots, and heats the metal in the furnace. Holding the metal on his anvil with tongs, the orange glowing metal is hammered into a blade. Glowing blue signalling the completion of the craft, Griswold quickly takes his etching hammers removing the excess metals and hammering his seal into the hilt.

Crafting Dice: 9

Quality: Good

Exp: 2

Item: Malachite Sword

Quality: Good

Shop: Tristram Molten Steelshaping

Description:This green metal blade is of decent quality. The edge isn't majorly sharp, making its make a bit apparent obviously a bit of a novice blacksmith

[Griswold 0]

Griswold takes one of his prepared black metal ingots, heating in the furnace. Watching it begin to glow orange with the fire, Its moved over the anvil for Griswold to shape a weapon out of it. Griswold hammers out to blades on each side, creating a two handed axe with grace. As the craft glows signaling completion, Griswold quickly removes the excess metals and etches his signature symbol into it.

Crafting Dice: 8

Quality: Good

Exp: 2

Item: Black Steel Axe

Quality: Good

Shop: Tristram Molten Steelshaping

Description: This decent quality axe was obviously made by a novice. The black sheer is nice, but the cutting edges arn't very sharp.

[Griswold 0]

Griswold grabs an Iron Ingot from the pile of bars, heating in the trough with pliers. The metal glows orange with power before Griswold takes his rusted hammer to it on his anvil. The metal cools as it glows blue signalling completion of craft, Griswold slams his etching hammers against the metal quickly removing excess metal and leaving his mark on the hilt. The misshapen sword produced is unusable, Griswold has no choice but to scrap it. It produces nothing feasible to reuse, "Pity" Griswold says under his breathe.

Crafting Dice: 3

Quality: Fail

Exp: 1

[Griswold 0]

Griswold takes a bit of cobalt, heating the metal preparing it for shaping. The orange material produced is hot, Griswold begins to pound the metal out. Flattening out into a plate, it glows blue Griswold perplexed by just a simple plate glowing blue begins to remove the useless edgings and inscribes his symbol on the metal before the glow dissipates. Stepping back, the metal changes from a simple plate into a full set of plate armor, as dark of blue as the metal used to forge it. The large hulking armor, is perfectly fitted for the man who forged the plate.

Crafting Dice: 11

Quality: Rare

Exp: 5

Item:

Griswold's Rattlecage

Quality: Rare

Shop: Tristram Molten Steelshaping

Description: This hulking plate of cobalt make is a complete set fitted to the man who crafted it. The set comprises of; a breastplate, a set of greaves, a pair of boots and a toggle-able helmet that appears and disappears at will. While the whole set of armor is worn, it creates a sense of security in the wearer allowing more gutsy forms of combat. +2 Heavy Metal Equipment

Approved!

[Griswold 0]

Griswold begins to work some iron, to get his barrings on an easier metal today. Griswold forges the blade, as the metal heats he hammers it down. The resulting blade is a bit crooked and isn't usable for combat. Griswold sets it in a barrel of unfit weapon to smelt down later.

Crafting Dice: 6

Quality: Bad

Exp: 1

Failed to Salvage!

[Griswold 0]

two crafts left for the day, Griswold thought to himself before he heats the black steel. "Better make this one count for something." as he hammers out a curved blade. The blade cools a bit, as Griswold bends the edge to produce the correct curve, as the blue begins to subside signalling completion Griswold quickly removes the excess metal and etches in his symbol to the hilt. The blade complete, Griswold begins to grind the edge to sharpen the sword before it sees battle.

Crafting Dice: 10

Quality: Uncommon

Exp: 3

Item: Black Steel Razor

Quality: Uncommon

Shop: Tristram Molten Steelshaping

Description: This blade was made by an adept blacksmith. The blade is curved correctly with a black sheen, showing some skill in the creator the edge is pretty sharp. +1 Damage

Approved!

Given to Eruda

[Griswold 0]

Griswold begins to craft with the malacite, heating the metal in the furnace before hammering to a spear edge. the spear head isn't very sharp Griswold places it into the barrel of failures.

Crafting Dice: 6

Quality: Bad

Exp: 1

Successfully Salvaged!

[Eruda 0]

Eruda remembers Griswold saying he had a shop so she looks it up on. His profile read that he had a shop on floor 9. "Oh yay, hope I don't die," Elda says before saying "Floor 9." Elda head spins as she swirls up to floor 9. Elda get there and discovers that it some kind of volcanic town. She can feel the heat come up from the ground. Elda looks around and sees what looks like a blacksmith shop. She walks in and says "G-g-griswold, are you here? I m-m-made something for you!" Elda said with a nervous voice waiting for someone to say something.

[Griswold 0]

Griswold is surprised by the encounter, Eruda comes in as he is smelting some ores down into ingots. "Aye lass, what can I do for yah?" Griswold says as she approaches his furnace. The little sandy blonde female presents a leather wrist brace, of extremely high quality. Griswold finishes pouring the metal into the ingot mold, as it rapidly cools and he sets them into the ingot pile. Walking to over to Eruda, he looks down at her gift.

Ore Used:2* Cobalt Ore

Bar Obtained: 2*Cobalt Ingot

3 Slag Produced

[Eruda 0]

Elda smile and says sorta nervously, "I t-thought you could use this, being a blacksmith and all." Elda waits for a minute before saying "Later I am going to ask you to make me a perfect sword if you don't mind." Elda hand Griswold his bracer stands there for a moment. Elda accepts his trade/gift and walk out the door waving back at Griswold saying "See you later." Elda heard him lock the door behind her. Elda admires the new sword she got and smiles as she puts it in her bag.

Griswold Obtains:

Item: Griswold's Insight

Quality: Perfect

Shop: Elda's Tailoring Shop

Description: A Medium support bracer made of thick manaweave material. The bracer is made for a right hand only and it's as long as a formarm and raps around the thumb make a sturdy support for a blacksmith to use a hammer. +1 Experience gain while blacksmithing

[Griswold 0]

Griswold slips the wrist bracer around his right hand, it feels a perfect fit keeping his wrist supported while working the anvil. Griswold looks at the lass with a slight tear in his eye "alrighty lass, ill take your gift. but you have to take something from me in return." said in a heavy scottish accent before he hands Eruda:

Item: Black Steel Razor

Quality: Uncommon

Shop: Tristram Molten Steelshaping

Description: This blade was made by an adept blacksmith. The blade is curved correctly with a black sheen, showing some skill in the creator the edge is pretty sharp. +1 Damage

Griswold eagerly gets to work with the new gift as the girl leaves moments after he slips it on. Taking up a silver ingot, Griswold heats it to a bright orange in the furnace. Hammering out a dagger with his anvil, it glows completing as Griswold cuts off excess metals and etches his symbol into the weapon. Cooling its dull as a mace, not fit to be used in battle. Griswold sets it aside to melt it down later.

Crafting Dice: 6

Quality: Bad

Exp: 1+1

Failed to Salvage!

[Griswold 0]

Griswold begins to heat some black steel, hoping to forge something of worth to repay Eruda for her kindness. Hammering at the metal, he strikes it to hard as the material he is working on is crushed flat before disappearing into data. Looking down at his tongs and hammer Griswold responds "Well Tha't Happened" he says in his heavy scottish accent.

Crafting Dice: 1

Quality: Epic Fail

Exp: 1+1

[Griswold 0]

Griswold tries again to work the black steel for Eruda. Hammering again at the metal it forms, but while forming the curve it over bends, making it unfit for combat.

Crafting Dice: 6

Quality: Bad

Exp: 1+1

Successfully Salvaged!